An alphabetical list of concepts from the climbing materials industry.

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z

A
go up


• Access scaffolding
  Rolling towers with scaffold stairs to climb the tower easily.
• Adapter frame(s)
  Frame to make the adjustment from a wide to a small rolling tower.
• Adapter pen(s)
  Separate pen on a coupling to adjust from a wide to a smalle roling tower on any desired place.
• Aluminium
  Light weighted metal of which the APW producst are made off.
• Anodize, Anodized
  Treatment of aluminium material that gives protection against corrosion and stains less.
• Anti-climbing
  Special frames to avoid access to the scaffolding.

B
go up


• Box-truss(es)
  Square trusses consisting of four tubes with small tubes in between.
• Brace(s)
  Horizontal and diagonal tubes with claws, responsible for stability in the rolling tower.
• Bridge carrier(s)
  Support for the triangle bridge or working bridge.
• Bridge support(s)
  See Bridge carrier.
• Building frame(s)
  Part of the rolling tower, the tower is build with these frames.

C

go up


• Carbondeck(s)
  Light weighted alternative for wooden decks, to be used at the platforms.
• Chimney scaffolding
  See Roof scaffold.
• Climbing material (climbing materials)
  All products that are used to work on heights.
• Combi-ladder(s)
  Ladder from Telesteps, can also be used as stepladder.
• Combination ladder(s)
  Ladder that can be used as regular ladder or as A-standing ladder.
• Conic link(s)
  Special connecting link with conic shape for the rolling tower.
• Corrosion
  Degradation of the (aluminum) material, for example by weather.

D
go up


• Diagonal (brace)
  See brace.

• Double brace
  Two braces that are connected with strenghtening pieces. Is used as guardrail or as strenghtening piece when the diagonal braces can't be placed.
• Double brace (interior building floor)
  Special double brace to stabilise the interior building floor.
• Double stepladder(s)
  Stepladder that has access on both sides.

E
go up


• Extension ladder(s)
  Ladder that can be used in straight shape only.
  

F
go up


• Floor carrier (roof scaffold)
  Part of the roof scaffold, to support the platform.
• Floor carrier (interior building floor)
  Special shore to support the building floor.
• Floor bearer(s)
  See floor carrier (roof scaffold).
• Folding unit(s)
  Extension piece to reach higher working heights with the folding scaffold.
• Free span
  Maximum free hanging span of i.e. the triangle bridge.
• Frame(s)
  See building frame.
• Folding scaffold(s)
  Folaway scaffold for interior use.
• Folding scaffold wheel(s)
  A wheel that's specially designed for the folding scaffold.

G
go up


• Guardrail frame(s)
  Part of the rolling tower, these frames are used as guardrail on top of the rolling tower.
• Guardrail holder(s)
  Special holder for the working bridge or triangle guardrail.
• Guardrail brace(s)
  See double brace.
• Guardrail work
  All rolling tower parts that are used as a guardrail.
• Gutter work trough leg
  See gutter tent
• Gutter tent
  Special construction to place a sail from the gutter.

H
go up


• Horizontal (brace)
  See brace.

I
go up


• Interior finishing floor(s)
  Special working floor for use inside. An entire room can be provided with a higher working floor.

J
go up

K
go up

L
go up


• L960 platform(s)
  L960 is a type of platform that is named after the profile used, this type is standard for the APW and HT rolling tower.
• L997 platform(s)
  L997 is a type of platform that is named after the profile used, this type is standard for the Euro rolling tower.
• Ladder(s)
  Product to work on heights for a short time.
• Ladder put off holder(s)
  See Laddermax.
• Ladder grip
  Non skid support to be used with a ladder.
• Ladder hook(s)
  With this hooks you can place your ladder over a ridge i.e.
• Laddermax
  Piece of extension for the ladder, keeps it away from the wall.
• Ladder feet
  Rubber non skid feet at the bottom of the ladder.
• Loft ladder
  Ladder to access the attic.

M
go up


• Maximum load
  The maximum weight a scaffold or specific part can carry.
• Middle platform(s)
  Middel, adjustable, support for the roof scaffold.

N

go up

• Non-skid profile
  Special profile with build-in non skid layher, avoids slipping away.

O
go up

P
go up


• Painters scaffolding
  See Renovation scaffold.
• Platform(s)
  Platform, with or without trapdoor, is placed in the rolling tower to work on.
• (Maximum) Platform height
  The maximum platform height is where the platform can be placed in it's highest position.
• Pull-up ladder(s)
  The pull-up ladders can be pulled up with a cord.
• Put of holder(s)
  See Wall put of holder.

Q
go up

R
go up


• Rain sails
  See Raincover.
• Rain cover(s)
  Rain cover made from a construction of frames and/or tubes covered with sail.
• Renovation frame(s)
  Special frame for the renovation scaffold.
• Renovation scaffold(s)
  Scaffolding made to work on long, but not very high, distances.
• Roof console(s) (set)
  Tool to make all parts of a home easily accessible from rolling towers.
• Roof ridge piece(s)
  Part of the roof scaffold that's placed on the roof ridge.
• Roof ridge accessory
  Handles to place a ladder on the roof ridge.
• Roof edge security
  Construction to protect the edge of the roof with guardrails.
• Roof scaffold sleeve
  T-shaped piece to place the roof scaffold or console on the roof.
• Roof scaffolding
  Special scaffold for use on the roof.
• Rollerstep
  Special wheel construction to use with the stepladder.
• Rolling tower(s)
  Temporary construction of aluminium to work on heights.
• Rubble catcher(s)
  Part of the anti climbing set, catches falling rubble.
• Rung(s)
  Part of the building frame on which you climb the rolling tower, provided with non skid profile.

S
go up


• Safety feet
  See Ladderfeet.
• Single stepladder
  Stepladder with access on one side.
• Single guardrail holder(s)
  Vertical tube to be placed on top of the scaffold, to attach the guardrail braces.
• Single ladder(s)
  Ladder made of one piece.
• Spindle(s)
  Swivel spindle to adjust the height of a wheel or footplate.
• Spindle with footplate
  Aluminium or steal footplate with swivel spindle to adjust the height.
• Spread tape
  Woven textile tape that's used for spread standing security.
• Spread standing security
  Security to avoid that two ladder- or stepladder parts slip away.
• Stabilisation beam
  This beam can be placed at the bottom of a ladder for more stability.
• Stabiliser(s)
  The stabiliser is fixed on the rolling tower to provide stability and to avoid the rolling tower to fall with high winds i.e.
• Stabiliser link(s)
  Plastic link to attach the stabiliser to the rolling tower.
• Scaffold(s)
  See Rolling tower.
• Scaffold buffer(s)
  Used to avoid wall damaging from a scaffold.
• Scaffold height
  Total height of the rolling tower, including guardrails.
• Scaffold stair(s)
  Special aluminium stepladder for use in a rolling tower.
• Scaffold support
  Used to avoid the scaffold to sink away in soft undergrounds.
• Scaffold trailer(s)
  Special trailer to transport your rolling tower.
• Stepladder
  Support to work on heights temporary.
• Stepladder feet
  Rubber non skid feet at the bottom of the stepladder.
• Stepladder handle(s)
  Handle for use on the double stepladder.
• Storm security
  Special locking pen to keep the platform in the rolling tower, even at strong winds.
• Stucco stepladder
  Stepladder specially designed for stucco workers.
• Stucco floor
  See Interior Building floor.
• Swivel link(s)
  Plastic coupling to connect multiple parts to each other.
• Sail stretcher (triangle bridge)
  Part of the triangle bridge rain covers, used to stretch the sail.

T
go up


• Telescopic ladder(s)
  See Wakü ladder or Telesteps.
• Telescopic folding scaffold
  Length adjustable folding scaffold.
• Telescopic stabiliser(s)
  See Stabiliser, only telescopic so the end is adjustable.
• Telesteps
  Telescopic (adjustable) ladder or stepladder.
• Top platform
  Top support of the roof scaffold.
• Toe board set
  Toe boards can be used on the rolling tower to avoid tools to drop down.
• Toe board holder(s)
  Toe board holders are plastic parts to keep the toe boards on it's place.
• Top roll(s)
  Plastic/rubber rolls that are placed on top of the ladder. It makes it easier to pull up the ladder.
• Tool box
  Plastic box to place on a double stepladder.
• Truss(es)
  Triangle trusses consisting of three tubes with support tubes in between.
• Track(s)
  Flat trusses consisting of two tubes with support tubes in between.
• Triangle bridge(s)
  Triangular shaped bridge for use at large distances.
• Triangle part(s)
  Triangular shaped part of the triangle bridge.

U
go up


• Exit platform
  Upper platform in the access scaffolding, from this platform you'll enter the building or object the scaffold's placed for.

V
go up

W
go up


• Wakü ladder(s)
  Multifunctional telescopic ladders.
• Walking bridge(s)
  See working bridge.
• Walk trough frame(s)
  Frame with an opening on the left, right or center. Can be used at small entrances or as an extension to walk trough multiple scaffolds.
• Wall put-off holder(s)
  Product to keep the climbing material from the right distance from the wall.
• Wall anchoring
  See wall attachment.
• Wall attachment
  Product to attach the scaffold to the wall.
• Wall attachment hook(s)
  Hooks that enable your ladder to be stored on the wall.
• Work trough extension leg
  See gutter tent.

• Wall thickness
  The thickness of the material (tubes).
• Workload
  See Maximum load.
• Working bridge(s)
  Aluminium walking bridge for use in the working masts or between 2 rolling towers.
• (Maximum) Working height
  Maximum height that can be reached with your arms, based on a person's lenght between +/- 1.60 - 1.80 m.
• Working mast(s)
  Masts for the working bridges.
• Working platform
  The working platform is the platform you work on.
• Working floor(s)
  See Platform.
• Working bridge carrier
  See Floor carrier.
• Wheel(s)
  Double braked wheel with rubber or nylon tyre.

X
go up

Y
go up

Z
go up